OVERKILL Command in AutoCAD – Removing Duplicate and Overlapping Objects
AutoCAD OVERKILL Command Access
COMMAND LINE: OVERKILL

DEFAULT KEYBOARD SHORTCUT: OV
RIBBON: MANAGE| CLEANUP TAB | OVERKILL

1. Introduction to OVERKILL
The OVERKILL command in AutoCAD is a drawing cleanup tool that removes duplicate and overlapping objects and combines qualifying line segments into simpler geometry. It is particularly useful when working with drawings that contain unnecessary objects created through copying, editing, importing, or exporting CAD files.
Unlike many Modify commands, OVERKILL does not necessarily produce a visible change in the drawing. Instead, it simplifies the underlying geometry by eliminating redundant objects and consolidating overlapping or adjacent segments.
OVERKILL is not a command most AutoCAD users need every day. However, it is an important tool to understand, especially when working with drawings created by other people or exported by other software applications.
2. What Does OVERKILL Do?
OVERKILL examines selected drawing objects and identifies geometry that can be removed or consolidated without unnecessarily changing the drawing's appearance.
The command performs several cleanup operations, including:
- Removing duplicate objects: Eliminates redundant objects occupying the same location.
- Removing overlapping geometry: Identifies overlapping portions of supported objects and eliminates unnecessary duplication.
- Combining adjacent line segments: Consolidates qualifying collinear lines that meet end to end.
- Simplifying polylines: Removes unnecessary vertices and overlapping segments within qualifying polylines.
Consider a straight line that appears to be a single object but actually consists of several individual line segments. Some segments meet end to end, while others partially overlap.

Multiple overlapping and adjacent line segments appear to form one continuous line, but the grips reveal that they are separate objects.
When these objects are selected, the grips reveal that the apparent line is actually made up of multiple objects.
After running OVERKILL with the appropriate options, the redundant and overlapping segments can be consolidated into one continuous line.

After OVERKILL, the overlapping and adjacent segments have been consolidated into one line with three grips.
The line looks essentially identical, but selecting it now displays only three grips: one at each endpoint and one at the midpoint.
This illustrates one of the most important characteristics of OVERKILL: the geometry becomes simpler even though the drawing looks the same.
3. How to Use the OVERKILL Command
Using OVERKILL is straightforward, although the results depend on the selected geometry and the options specified.
- Enter OVERKILL at the Command Line and press Enter.
- Select the objects you want to clean up. You can select individual objects, a group of objects, or the entire drawing.
- Press Enter to complete the selection.
- AutoCAD displays the Delete Duplicate Objects dialog box.
- Review the tolerance, object property, and geometry optimization options.
- Click OK to process the selected objects.

The Delete Duplicate Objects dialog box controls how OVERKILL identifies duplicate geometry, compares object properties, and combines overlapping or adjacent objects.
AutoCAD examines the selected geometry and removes or combines qualifying objects according to the selected options.
After the command finishes, the Command Line reports the cleanup results, including the number of objects deleted and the number of overlapping objects or segments combined.
For unfamiliar drawings, consider saving a copy before performing extensive cleanup. This allows you to compare the original and cleaned drawings if necessary.
4. Understanding the OVERKILL Options
The Delete Duplicate Objects dialog box controls how OVERKILL identifies redundant geometry and determines which objects can be combined.
The following table summarizes the most important options.
| Option | Description |
|---|---|
| Tolerance | Specifies the allowable geometric difference when comparing objects. |
| Ignore Object Properties | Allows selected properties, including Layer, Color, Linetype, and other supported properties, to be disregarded during comparisons. |
| Optimize Segments Within Polylines | Removes unnecessary vertices and segments within qualifying polylines. |
| Combine Collinear Objects That Partially Overlap | Combines qualifying objects that lie along the same line and overlap. |
| Combine Collinear Objects When Aligned End to End | Combines qualifying objects that lie along the same line and meet at their endpoints. |
| Maintain Associative Objects | Preserves applicable associative relationships during cleanup. |
Tolerance
The Tolerance setting determines how closely objects must match geometrically to qualify for cleanup.
A tolerance of zero requires exact geometric agreement for the applicable comparisons. Increasing the tolerance allows small geometric differences to be considered.
Use caution when increasing this value. An unnecessarily large tolerance can cause objects that were intentionally drawn differently to be treated as equivalent.
Ignore Object Properties
By default, differences in certain object properties can prevent otherwise identical objects from being treated as duplicates.
The Ignore Object Properties options allow OVERKILL to disregard selected property differences during comparison.
For example, two coincident lines on different layers may need to remain separate. Ignoring their Layer property could allow one of them to be removed.
Combining Collinear Geometry
The two collinear combination options are especially useful when cleaning up fragmented drawings.
One allows qualifying overlapping objects to be consolidated. The other allows qualifying objects that meet end to end to be combined.
These options are particularly helpful when a drawing contains multiple short line segments that could be represented by fewer, longer lines.
5. Real-World Applications of OVERKILL
OVERKILL is especially valuable when working with drawings created or modified outside your normal drafting workflow.
Example 1 – Simplifying Imported Architectural Geometry
Architectural drawings exported by other applications sometimes contain numerous individual line segments where a single continuous line would be more useful.
A wall line, for example, might consist of several adjacent segments, including some that overlap. Visually, the line appears continuous, but selecting it reveals multiple objects.

Architectural drawings can contain multiple line segments where a single continuous line would be more useful. OVERKILL can consolidate qualifying segments.
Running OVERKILL can combine qualifying segments into a single line. This simplifies subsequent editing because the line can be selected, moved, copied, or modified as one object instead of several.
Example 2 – Removing Duplicate Objects in an Architectural Plan
Another common problem is duplicate geometry occupying exactly the same location.
Consider an architectural floor plan that appears normal when opened in AutoCAD. The drawing contains walls, dimensions, fixtures, and other typical architectural objects.

Running OVERKILL on this architectural drawing deleted 1,741 duplicate objects and 2,021 overlapping objects or segments. Despite this substantial cleanup, the drawing's appearance remained virtually unchanged.
Running OVERKILL on this particular drawing removed over 1,700 duplicate and over 2,000 overlapping objects.
Despite removing so many objects, the drawing looked virtually identical afterward.
The benefit became apparent when working with the drawing. Selecting and modifying objects was easier because there were fewer unnecessary objects occupying the same locations.
This is an important reason to use OVERKILL. A drawing does not have to look messy to contain a substantial amount of redundant geometry.
6. When Should You Use OVERKILL?
OVERKILL is primarily a cleanup command rather than an everyday production tool.
Situations where it can be useful include:
- Client and consultant drawings: Cleaning up unfamiliar drawings before incorporating them into your work.
- Imported and exported files: Eliminating redundant geometry introduced during file conversion.
- Revit exports: Consolidating qualifying line segments created during the export process.
- Heavily edited drawings: Removing duplicate objects accumulated through copying, pasting, and repeated modifications.
- Drawings with selection problems: Eliminating unnecessary coincident objects that make geometry difficult to select or modify.
OVERKILL can also be useful before performing other drawing cleanup operations or preparing geometry for additional drafting work.
7. Limitations and Precautions
Although OVERKILL is a powerful cleanup tool, it does not repair every type of drawing problem.
Objects must meet the applicable geometric conditions. Lines that appear collinear may contain small offsets, gaps, or differences in elevation that prevent them from being combined.
Object properties matter. Two geometrically identical objects may be treated differently because of their layers, colors, linetypes, or other properties.
Tolerance requires care. Increasing the tolerance may allow additional geometry to be consolidated, but excessive values can produce unintended results.
OVERKILL does not automatically create polylines. Combining several collinear line objects can produce a longer line rather than a polyline. Use PEDIT or JOIN when a particular type of combined object is required.
Not all duplicate-looking geometry is unnecessary. Some drawings intentionally contain coincident objects on different layers or with different properties.
For important drawings, save a copy before extensive cleanup and review the results afterward.
8. OVERKILL vs. Other Cleanup Commands
OVERKILL is one of several AutoCAD commands used to clean up or simplify drawings. However, these commands perform different functions.
| Command | Primary Function |
|---|---|
| OVERKILL | Removes duplicate and overlapping geometry and combines qualifying objects. |
| PURGE | Removes unused named objects and other purgeable items. |
| AUDIT | Checks the drawing database for errors and attempts to repair them. |
| JOIN | Combines compatible objects into a single object. |
OVERKILL and PURGE are particularly useful together because they address different types of unnecessary drawing content.
OVERKILL removes redundant drawing geometry, while PURGE removes unused definitions and other purgeable items that are no longer needed.
9. Common Mistakes and Troubleshooting
| Problem | Possible Cause or Solution |
|---|---|
| OVERKILL does not combine adjacent lines. | Verify that the lines are collinear and that the end-to-end combination option is enabled. |
| Duplicate objects remain. | Check the tolerance and ignored object properties. The objects may not be geometrically identical. |
| Geometry is removed unexpectedly. | Review the tolerance and ignored property settings. Restore the original geometry if necessary. |
| Multiple lines do not become a polyline. | OVERKILL is not a general-purpose polyline creation command. Use PEDIT or JOIN when appropriate. |
| The drawing looks unchanged after cleanup. | This is normal. OVERKILL may remove redundant objects without visibly changing the drawing. |
10. Summary
OVERKILL is a valuable AutoCAD cleanup command that removes duplicate objects, eliminates overlapping geometry, and combines qualifying line segments.
Although its results may not always be visually obvious, reducing unnecessary geometry can make drawings easier to select, edit, and maintain.
It is a particularly useful command to know when working with imported drawings, Revit exports, and files received from clients or consultants.
11. Related Commands and System Variables
| Command | Description |
|---|---|
| PURGE | Removes unused named objects and other purgeable drawing content. |
| JOIN | Combines compatible lines, arcs, and other supported objects. |
| PEDIT | Provides tools for editing and joining polylines. |
| EXPLODE | Breaks compound objects into their component objects. |
| AUDIT | Checks drawing database integrity and repairs certain errors. |
12. Frequently Asked Questions
OVERKILL removes duplicate and overlapping objects and combines qualifying line segments into simpler geometry. It helps eliminate unnecessary drawing objects without intentionally changing the drawing's appearance.
Enter OVERKILL at the Command Line, select the objects to clean up, and press Enter. Review the options in the Delete Duplicate Objects dialog box and click OK. AutoCAD removes qualifying duplicate lines and other redundant geometry.
Yes. OVERKILL can combine qualifying collinear line segments that overlap or meet end to end. The appropriate combination options must be enabled in the Delete Duplicate Objects dialog box.
Yes. OVERKILL supports polylines and can remove redundant vertices, overlapping segments, and other unnecessary geometry within qualifying polylines. The results depend on the geometry and selected optimization options.
Tolerance specifies the allowable geometric difference when comparing objects. A tolerance of zero requires exact geometric agreement for applicable comparisons. Increasing the tolerance allows small differences, but excessively large values may produce unintended results.
Yes, when the appropriate object property options are selected. Enabling the option to ignore Layer differences allows OVERKILL to consider geometrically identical objects on different layers as duplicates. Use this option carefully when layer assignments are important.
Usually, OVERKILL is intended to simplify geometry while preserving its visible appearance. Removing duplicate objects may produce no noticeable visual difference. However, certain settings and tolerance values can produce unintended changes, so reviewing the results is recommended.
The segments may not be collinear, may have different elevations, or may have object property differences that prevent consolidation. Verify the geometry and review the combination, tolerance, and ignored property options.
OVERKILL removes redundant drawing geometry, including duplicate objects and qualifying overlapping line segments. PURGE removes unused named objects and other purgeable drawing content. The commands perform different cleanup operations and can complement one another.
Yes. Use the UNDO command or Ctrl+Z to reverse the OVERKILL operation, provided it remains within the available undo history. Saving a copy of an important drawing before extensive cleanup is also recommended.
Written by
![]() |
Scott Ogren, PE |
|
Scott Ogren, PE first used AutoCAD in 1993 while in college studying civil / structural engineering. In 2002, I founded Ogren Engineering and have been working for myself since. AutoCAD and drafting skills are a requirement to work for my firm. Over the years, I have coached, tutored, and taught many people how to use and become proficient with AutoCAD. Ogren Engineering: https://ogreneng.com/ In addition, Scott has written software to perform the lateral analysis of a wood-framed building. Shearwall Pro: https://shearwallpro.com/ |

