Quick Properties in AutoCAD: How to Use and Customize the Quick Properties Palette

AutoCAD Quick Properties Access

COMMAND LINE: QUICKPROPERTIES

Quick Properties - Command Line

DEFAULT KEYBOARD SHORTCUT: QP or CTRL+SHIFT+P

STATUS BAR: QUICK PROPERTIES BUTTON

Quick Properties - Status Bar

Quick Properties Introduction

Quick Properties in AutoCAD provides a convenient way to view and modify object properties without opening the full Properties palette. Instead of navigating through a large collection of settings, Quick Properties displays a compact palette containing commonly used properties for selected objects.

The Quick Properties palette can display information such as an object's Layer, Color, Linetype, and other settings. The available properties depend on the object type and how Quick Properties has been configured.

AutoCAD provides several ways to control Quick Properties, including the status bar, the QUICKPROPERTIES command, and the QPMODE system variable. Understanding these controls allows you to customize the feature to suit your drafting workflow.

1. What Is Quick Properties in AutoCAD?

Quick Properties is a contextual palette that provides access to selected object properties. When Quick Properties is enabled, selecting an object can automatically display a small palette near the selection.

The palette provides much of the same information available in the full Properties palette, but in a smaller, customizable interface.

For example, selecting a line might display its Layer, Color, and Linetype. Selecting a circle or polyline can display different information appropriate to that object type.

Quick Properties is particularly useful when making routine changes to individual objects without needing the full Properties palette open continuously.

AutoCAD Quick Properties palette showing Layer, Color, and Linetype settings for a selected drawing object.

Screenshot of AutoCAD showing a selected drawing object with the Quick Properties palette open, demonstrating access to editable object properties.

2. How to Turn Quick Properties On or Off

AutoCAD provides several methods for controlling Quick Properties. The status bar and QPMODE system variable control automatic display, while the QUICKPROPERTIES command allows you to open the palette manually.

2.1 Using the Status Bar

The Quick Properties button on the AutoCAD status bar provides a convenient way to enable or disable automatic Quick Properties display.

Click the button to toggle the feature on or off. When enabled, selecting an object can automatically display the Quick Properties palette.

If the Quick Properties button is not visible, open the status bar customization menu at the lower-right corner of AutoCAD and enable the Quick Properties control.

Quick Properties status bar button in AutoCAD used to enable or disable automatic Quick Properties display.

The Quick Properties button on the AutoCAD status bar controls automatic display of the Quick Properties palette.

2.2 Using the QPMODE System Variable

The QPMODE system variable controls whether Quick Properties appears automatically when objects are selected.

Enter QPMODE at the command line and specify one of the following values:

QPMODE Value Description
0 Disables automatic Quick Properties display.
1 Enables automatic Quick Properties display for all selected objects.
2 Enables automatic display only for object types configured to use Quick Properties in the CUI editor.

QPMODE can also have negative values, such as -1 or -2. These disable automatic Quick Properties display while preserving the corresponding positive setting for later use.

For automatic Quick Properties display to function, the PICKFIRST system variable must also be set to 1. PICKFIRST allows objects to be selected before a command is started.

Setting QPMODE to 0 prevents the palette from appearing automatically, but the QUICKPROPERTIES command can still be used to open it manually.

Get the Top 35 AutoCAD Commands for FREE

2.3 Using the QUICKPROPERTIES Command

The QUICKPROPERTIES command opens the Quick Properties palette for selected objects.

To use the command:

  1. Select one or more objects in the drawing.
  2. Enter QUICKPROPERTIES at the command line.
  3. Press Enter.

The Quick Properties palette opens and displays the configured properties for the selected objects.

Unlike QPMODE, which controls automatic display, the QUICKPROPERTIES command provides a way to invoke the palette when needed.

3. How to Use Quick Properties

Once Quick Properties is enabled, editing object properties is straightforward.

  1. Select an object in Model Space or Paper Space.
  2. Locate the Quick Properties palette that appears near the selection.
  3. Find the property you want to modify, such as Layer, Color, or Linetype.
  4. Click the property's value and make the desired change.
  5. Press Enter or complete the selection to apply the change.

For example, if a line is on the wrong layer, you can select the line and change its Layer property directly Quick Properties without opening the Layer Properties Manager.

The available properties depend on the selected object. Some properties can be edited, while others provide information that cannot be changed directly.

When multiple objects are selected, Quick Properties can display properties applicable to the selection. The available fields may be different those displayed when a single object is selected.

4. How to Customize Quick Properties

One of the most useful features of Quick Properties is the ability to customize which properties appear for different object types.

Rather than displaying every available property, AutoCAD allows users to configure the palette to show information relevant to their work.

4.1 Opening Quick Properties Settings

Enter DSETTINGS at the command line and open the Quick Properties tab to access display settings.

Quick Properties settings are also available through the Options dialog on the Selection tab.

These settings control aspects of the palette's behavior, including its location and how it responds to object selection.

4.2 Customizing Displayed Properties

The Customize User Interface (CUI) editor allows you to configure which properties appear in Quick Properties for different object types.

Enter CUI at the command line and locate the Quick Properties configuration in the customization interface.

From there, you can select an object type and specify which properties should appear when that type of object is selected.

For example, you might configure lines to display Layer, Color, and Linetype while configuring circles to display additional geometric information.

AutoCAD CUI editor showing Quick Properties customization options and the properties available for a selected object type.

The CUI editor allows users to customize which properties appear in the Quick Properties palette for different object types.

4.3 Controlling Palette Location and Behavior

Quick Properties can be configured to appear near the cursor or at a specified location.

This can be useful when the palette repeatedly covers geometry or interferes with selecting nearby objects.

Additional settings control the palette's display behavior, including how many rows are visible and whether the palette expands to show more information.

A carefully configured Quick Properties palette can provide convenient access to frequently modified settings without unnecessarily covering the drawing.

5. Quick Properties vs. the Full Properties Palette

AutoCAD provides two related tools for viewing and editing object properties: Quick Properties and the full Properties palette.

Both tools access the same underlying object properties, but they differ in how much information they display and how they interact with the drawing interface.

5.1 The Full Properties Palette (Ctrl+1)

The full Properties palette provides comprehensive information about selected objects.

Press Ctrl+1 to open or close the Properties palette. Alternatively, enter PROPERTIES at the command line.

The Properties palette displays information organized into categories such as General, Geometry, and other categories appropriate to the selected object.

For example, selecting a line can display its Layer, Color, Linetype, start and end coordinates, and length. Other object types provide their own relevant properties.

Like Quick Properties, the full Properties palette allows you to modify editable values directly.

One important advantage of the full Properties palette is that it can remain open while you work. It can be docked along either the left or right side of the AutoCAD drawing window, as shown in the screenshot below.

The palette can also float over the drawing area or be configured to auto-hide, allowing users to control how much screen space it occupies.

When nothing is selected, the Properties palette displays information about the current drawing or viewport rather than the properties of a specific object.

AutoCAD Properties palette docked on the right side of the drawing window showing General, Plot Style, View, and Misc settings.

Screenshot showing the AutoCAD Properties palette docked on the right side of the drawing area, providing continuous access to object and drawing properties.

5.2 When to Use Quick Properties vs. the Full Properties Palette

The following table summarizes the differences between these tools.

Feature Quick Properties Full Properties Palette
Display Compact palette Comprehensive palette
Typical access Object selection or QUICKPROPERTIES Ctrl+1 or PROPERTIES
Available information Customizable selection of properties Extensive object properties
Screen space Small, contextual display Larger, dockable or floating palette
Best use Quick, routine property changes Detailed inspection and editing

Quick Properties is convenient when only a few settings need to be modified. The full Properties palette is more appropriate when inspecting geometry, reviewing detailed object information, or making numerous changes.

Neither tool replaces the other. Both can be useful depending on the task and the user's preferred drafting workflow.

6. Troubleshooting Quick Properties

Several settings can affect whether Quick Properties appears and how it behaves.

Quick Properties does not appear when an object is selected. Check that QPMODE is enabled and PICKFIRST is set to 1. If QPMODE is set to 2, confirm that the selected object type is configured for Quick Properties in the CUI editor.

The palette does not display the property you need. Open the CUI editor and review the Quick Properties configuration for the selected object type. The desired property may not be included in the current configuration.

The palette appears in an inconvenient location. Adjust its location settings through the Quick Properties configuration options.

Quick Properties appears unexpectedly. Set QPMODE to 0 or disable Quick Properties using the status bar button.

The status bar button is missing. Open the status bar customization menu and enable the Quick Properties control.

7. Tips for Using Quick Properties Efficiently

Quick Properties is most effective when configured to display only the information you frequently need.

For routine drafting, properties such as Layer, Color, and Linetype may be sufficient. Adding too many fields can make the palette unnecessarily large and reduce its convenience.

If you frequently inspect object geometry or modify many different properties, keeping the full Properties palette docked on one side of the screen may be more efficient.

You can also leave automatic Quick Properties disabled and use the QUICKPROPERTIES command when you specifically need the smaller palette.

The best approach depends on how frequently you modify properties and how much drawing space you want to preserve.

8. Related AutoCAD Commands and System Variables

Several AutoCAD commands and system variables are closely associated with Quick Properties.

Command or Variable Function
QPMODE Controls automatic Quick Properties display.
QUICKPROPERTIES Opens the Quick Properties palette.
PROPERTIES Opens the full Properties palette.
CUI Opens the Customize User Interface editor.
PICKFIRST Controls whether objects can be selected before starting a command.

Understanding these related tools makes it easier to configure Quick Properties and troubleshoot selection-related behavior.

9. Conclusion

Quick Properties provides a convenient way to view and edit commonly used object properties without opening the full Properties palette.

By configuring QPMODE and customizing the displayed fields through the CUI editor, you can control when Quick Properties appears and what information it provides.

For more detailed inspection, the full Properties palette remains available through Ctrl+1 and can be docked along either side of the drawing window.

Understanding both tools allows you to choose the most efficient way to inspect and modify object properties in AutoCAD.

10. Frequently Asked Questions

Quick Properties is a compact palette that displays selected object properties and allows users to modify commonly used settings without opening the full Properties palette.

Use the Quick Properties status bar button or change the QPMODE system variable. Set QPMODE to 0 to disable automatic display.

QPMODE is a system variable that controls automatic Quick Properties display. A value of 0 disables automatic display, 1 enables it for all selected objects, and 2 limits it to configured object types.

QUICKPROPERTIES opens the Quick Properties palette for selected objects, providing access to their displayed properties.

Quick Properties displays a compact, customizable set of properties. The full Properties palette generally displays more detailed information and can remain docked in the AutoCAD interface.

Enter CUI and locate the Quick Properties customization settings. Select an object type and choose which properties should appear.

QPMODE may be set to 0, PICKFIRST may not be set to 1, or the selected object type may not be configured for Quick Properties when QPMODE is set to 2.

You can reposition the palette and configure its location through the Quick Properties settings.

Yes. The CUI editor allows you to customize the properties displayed for supported object types.

Enter QPMODE and set its value to 0, or disable Quick Properties using the status bar button.

Loading Conversation

Written by


Scott Head Shot.png

Scott Ogren, PE

 

Scott Ogren, PE first used AutoCAD in 1993 while in college studying civil / structural engineering.

In 2002, I founded Ogren Engineering and have been working for myself since. AutoCAD and drafting skills are a requirement to work for my firm. Over the years, I have coached, tutored, and taught many people how to use and become proficient with AutoCAD.

Ogren Engineering: https://ogreneng.com/

In addition, Scott has written software to perform the lateral analysis of a wood-framed building.

Shearwall Pro: https://shearwallpro.com/