LIMITS Command in AutoCAD
AutoCAD LIMITS Command Access
COMMAND LINE: LIMITS

DEFAULT KEYBOARD SHORTCUT: LIM
RIBBON: NONE BY DEFAULT
LIMITS is not available in the AutoCAD Ribbon
1. What Is the LIMITS Command in AutoCAD?
The LIMITS command in AutoCAD establishes a rectangular drawing area by specifying two coordinate points: the lower-left corner and the upper-right corner. These coordinates define the drawing limits in Model Space.
Drawing limits were more important in earlier versions of AutoCAD, when establishing a defined working area was a common part of preparing a new drawing. Today, most users work without giving drawing limits much consideration.
LIMITS does not create a visible rectangle or physical boundary. It establishes coordinate values that AutoCAD can use for drawing limits checking, grid display, and certain zoom operations.

The LIMITS command defines a rectangular drawing area using two coordinate points.
2. How to Access the LIMITS Command
The LIMITS command is most easily accessed through the AutoCAD command line.
Command Line: Type LIMITS and press Enter.
AutoCAD prompts you to specify the lower-left corner of the drawing limits, followed by the upper-right corner.
The command also provides ON and OFF options for controlling drawing limits checking.

The LIMITS command prompts users to specify the two corners of the drawing area.
3. How to Set Drawing Limits in AutoCAD
Setting drawing limits requires specifying two coordinate points.
- Type LIMITS at the command line and press Enter.
- At the lower-left corner prompt, enter 0,0 and press Enter.
- At the upper-right corner prompt, enter 420,297 and press Enter.
- AutoCAD establishes the rectangular drawing limits using these coordinates.
- Enter ZOOM, select the All option, and press Enter to adjust the drawing view.
The coordinates are expressed in drawing units. For example, in a drawing using millimeters, an upper-right corner of (420,297) establishes a drawing area measuring 420 mm by 297 mm when the lower-left corner is (0,0).
Drawing limits can be changed at any time without changing the geometry already created in the drawing.
4. LIMITS Command Options
The LIMITS command provides options for defining the drawing area and controlling limits checking.
| Option | Description |
|---|---|
| Lower-Left Corner | Specifies the minimum X and Y coordinates of the drawing limits. |
| Upper-Right Corner | Specifies the maximum X and Y coordinates of the drawing limits. |
| ON | Enables drawing limits checking. |
| OFF | Disables drawing limits checking. |
When limits checking is enabled, AutoCAD can reject certain point inputs that fall outside the specified drawing limits.
Turning limits checking OFF does not erase or reset the coordinates. The defined drawing limits remain available for other operations.
5. Do Drawing Limits Restrict Where You Can Draw?
Drawing limits do not ordinarily prevent you from drawing outside the specified area. By default, limits checking is disabled, allowing users to create and modify geometry beyond the established limits.
Entering LIMITS and selecting ON enables limits checking. This can restrict the acceptance of points outside the drawing limits during drawing operations.
However, limits checking does not provide an absolute boundary for all geometry or editing operations. It should not be relied upon to contain every object within a specified area.
Drawing limits also do not determine the size of the printed sheet. Paper size and plotting are controlled separately through AutoCAD's layout and page setup tools.

With limits checking disabled, AutoCAD allows geometry to extend beyond the defined drawing limits.
6. LIMITS and the ZOOM All Command
One remaining practical use of LIMITS is its relationship with the ZOOM command.
The ZOOM All option considers both the defined drawing limits and the extents of the existing drawing geometry. If the drawing limits extend beyond the objects, ZOOM All can display a larger area than ZOOM Extents.
By comparison, ZOOM Extents adjusts the view to include the extents of the drawing objects without using the drawing limits to establish the viewing area.
This distinction can be useful when working with older drawings or drawings that have unusually large limits.
7. Is the LIMITS Command Still Useful?
LIMITS remains available in modern AutoCAD, but its importance has diminished considerably.
In earlier versions of AutoCAD, it was common practice to place title blocks directly in Model Space. Drawing limits were often established to correspond to the size of the drawing sheet, providing a defined working area. This was useful when drawings were organized around individual sheets rather than separate layouts.
Modern AutoCAD workflows are considerably different. Geometry is generally drawn at full size in Model Space, while title blocks are placed in Paper Space. Multiple layouts allow users to create several drawing sheets within a single DWG file, each with its own title block, viewports, and page setup.
As a result, drawing limits no longer serve much practical purpose in organizing drawing sheets. Even their relationship with ZOOM All offers limited benefits compared to modern navigation tools.
For most AutoCAD users, there is little reason to change drawing limits during routine drafting. LIMITS remains available for compatibility with older drawings and specialized workflows, but it is largely a legacy command.
8. Related AutoCAD Commands
| Command | Purpose |
|---|---|
| LIMITS | Establishes the rectangular drawing limits. |
| ZOOM | Changes the magnification and visible drawing area. |
| PAN | Moves the drawing view without changing magnification. |
| GRID | Controls drawing grid display and spacing. |
| GRIDMODE | Controls whether the drawing grid is displayed. |
See the CAD Master Coach articles on ZOOM, PAN, and GRIDMODE for additional information about controlling the drawing display.
9. Frequently Asked Questions
LIMITS establishes a rectangular drawing area using lower-left and upper-right coordinate points. These limits can be used for drawing limits checking, grid display, and certain zoom operations.
Not normally. Limits checking is disabled by default. Enabling the ON option can restrict certain point inputs, but it does not establish an absolute boundary for all drawing operations.
LIMITS defines a rectangular drawing area. ZOOM Extents adjusts the view to display the existing drawing objects without using the defined drawing limits.
No. LIMITS establishes drawing coordinates in Model Space. Printed paper size is controlled through layout and page setup options.
Generally, no. Most modern drafting workflows do not require drawing limits to be changed. LIMITS remains useful for certain specialized workflows and older drawings.
Written by
![]() |
Scott Ogren, PE |
|
Scott Ogren, PE first used AutoCAD in 1993 while in college studying civil / structural engineering. In 2002, I founded Ogren Engineering and have been working for myself since. AutoCAD and drafting skills are a requirement to work for my firm. Over the years, I have coached, tutored, and taught many people how to use and become proficient with AutoCAD. Ogren Engineering: https://ogreneng.com/ In addition, Scott has written software to perform the lateral analysis of a wood-framed building. Shearwall Pro: https://shearwallpro.com/ |

